The fundamental principle of Nanofiltration membrane’s technology is the use of pressure to separate soluble ions from water through a semi permeable membrane. The membrane, operates under a different hydraulic profile which is also known cross flow filtration, unlike a dead end filter.

Most Nanofiltration membranes are composite materials supported by polymer substrate and manufactured in a spiral design as opposed to a flat sheet or tube geometry. The predominant model used today for industrial applications is the spiral configuration.


Warning: sizeof(): Parameter must be an array or an object that implements Countable in /home/ghydrote/public_html/wp-content/themes/consulting/woocommerce/single-product/meta.php on line 24

Warning: sizeof(): Parameter must be an array or an object that implements Countable in /home/ghydrote/public_html/wp-content/themes/consulting/woocommerce/single-product/meta.php on line 25

The fundamental principle of Nanofiltration membrane’s technology is the use of pressure to separate soluble ions from water through a semi permeable membrane. The membrane, operates under a different hydraulic profile which is also known cross flow filtration, unlike a dead end filter.

Most Nanofiltration membranes are composite materials supported by polymer substrate and manufactured in a spiral design as opposed to a flat sheet or tube geometry. The predominant model used today for industrial applications is the spiral configuration.

Nanofiltration (NF), in water treatment, “bridges” a gap between UF and RO membranes.  It is sometimes referred to as a loose or lower rejecting RO membrane.  It could also be called a tight UF, as NF membrane pore size ranges from .01 to a little less than .001.  Generally, an NF membrane system lets more salt pass than an RO membrane.  In addition, an NF membrane element will produce the same quantity of product at 50 to 70% the applied pressure as an RO water treatment system.

There are applications where a 75% rate of salt rejection is preferable to 95 to 99%, especially when it is achieved using only half of the energy.  Unlike with RO membrane elements, the NF offerings of the major membrane manufacturers are quite different in performance from company to company.  With RO membrane elements, any model with less than 99.5% sodium chloride rejection, especially with seawater membranes, is considered inferior.  In the case of NF, there is a “place” for any membrane with a NaCl rejection rate of 40%, or more. Nanofiltration has also been called a “softening” membrane as while its salt rejection may be 80% or less, hardness rejection will often remain well over 90%.

Like RO, and unlike UF, a Nanofiltration Systems will recover a percentage of the feed water. Most all NF membranes are of a spiral wound configuration.

Other applications of nanofiltration are:

•    The removal of heavy metals from wastewater
•    The removal of pesticides from groundwater
•    Wastewater recycling in laundry facilities
•    Water softening
•    Nitrate removal

Application Permeate Concentrate Benefits of NF
Whey / Whey Permeate Salty wastewater Desalted whey concentrate Allows the recovery of lactose and whey protein concentrate with reduced salt content
Textile Dyes Water, salts, BOD, COD and color NF is used to desalt  dyes resulting in a higher value product
Caustic cleaning solutions Caustic cleaning solution BOD, COD, suspended solids, caustic cleaner Allows caustic cleaning solution to be recycled resulting in reduced cleaning chemical costs
Recycle of acid solutions Acid solution BOD, COD, calcium, suspended solids, acidic water Allows acid solution to be recycled resulting in reduced cleaning chemical costs
Water Softened water Hard water Potable water production. Softened water reduces scaling on equipment and heat exchange surfaces
Antibiotics Salty waste product Desalted, concentrated Antibiotics NF produces high value pharmaceutical products